HXD-1000TMB (2005) 视屏显示自动转塔显微硬度计

VIDEO-DISPLAY MICRO HARDNESS TESTER

特点 Features:

本机是在 HXD-1000TM(2005)数显显微硬度计主机上,通过CCD摄像头光学接筒,15吋显示器,直接能在显示器测量和操作,不仅提高了测量精度,还体现了像质清晰度,减少了在测量操作过程中的人为误差,在国内率先推出后深受大专院校、科研单位、国企和私企的欢迎,也受到外商的青睐。

This design is based on HXD-1000TMB(2005) digital micro hardness tester, added with CCD camera.15” TV which shows the measured picture. increased the accuracy of the measurement, shows the clear view of picture and decrease the error due to the human operation .therefore upon the release .it is welcomed by the university, science unit state and private owned enterprises. as well as foreign company

技术规格 MAIN SPECIFICATIONS

型号 Type

HXD-1000TMB

物镜 / 压头切换

Lens/Indenter switch

自动转塔切换

With Motorized Turret

试验力

Test force

9.807, 4.903, 2.942, 1.961, 0.9807, 0.4903, 0.2452, 0.0981 N

1000, 500, 300, 200, 100, 50, 25, 10 gf

加荷方式

Loading mode

程控自动加荷 , 保荷和卸荷

Program-controlled application, duration and removal of load

保荷时间

Duration time

5 – 60 sec selectable, 步长 (In step of ) 5 sec.

硬度测量范围

Measuring range

5 HV – 3000 HV

测量显微镜

Microscope

物镜 Objective: 40x; 10x (观察用 For observation ) , 目镜 Eyepiece: 15x

总倍率 Total: 600x; 150x (观察用 For observation )

显示器上倍率

Magnify on TV

约 About 2400x

最小检测单位

Min. detection

0.025 μm

测量读数方式

Reading mode

目镜或视屏测量 , 数字显示 , 打印输出硬度值 , 平均值 , 不均匀度,标准偏差 ,

Digital, Measurement with eyepiece or on TV.

Print-out Hardness values Average, Divergence,, Standard deviations,

试件最大高度

Max. test height

90 mm

标准配件,附件

Standard attachments

物镜 Objective 40x,10x, 维氏压头 V ickers indenter (在机上 Installed)

标准硬度块 Standard hardness block

薄片夹紧器 Sheet specimen clamp

小圆柱体夹紧器 Thin cylinder clamp

平口钳 Parallel-jaw vice

打印机 (内置) Printer (Built-in)

数码显微摄像目镜及软件 SDE-100 Digital imaging eyepiece

监视器 TV monitor, CCD摄像 头 Camera ,

选购件

Options

努氏压头 Knoop indenter 数码相机及适配镜 Digital camera & adaptor

电源 Power supply

220 VAC, 50/60 Hz

尺寸 Dimensions

外包尺寸 主机: Main tester: 54 x 50 x 64 cm (Packing size)

毛重 Gross weight

60 kg